Waterproofing for every surface — done the right way.
Each job starts with finding where water actually gets in, then choosing the correct method: cementitious coating, liquid membrane, bituminous coating, pressure grouting or joint sealant. Jump to the service you need:
Roof Waterproofing
Stop monsoon leakage at the slab. We clean and prep the roof, treat cracks and joints, then apply a sealed coating or membrane system that channels water away.
Signs you need it- Damp patches or dripping on the ceiling below
- Pooling water that doesn't drain after rain
- Visible cracks or blistered old coating
- Surface cleaning & crack/joint treatment
- Primer + cementitious or liquid-membrane coating
- Slope & drainage check, water-pond test
Terrace & Balcony Waterproofing
Exposed terraces and balconies take the worst of the weather. We seal the surface and detailing — parapets, drains and junctions — so water drains cleanly instead of seeping in.
Signs you need it- Seepage on walls/ceilings directly below the terrace
- Cracked or lifting tiles and grout
- Standing water near drains and parapets
- Surface prep + parapet & drain detailing
- Membrane/coating with proper slope to outlets
- Protective finish where required
Swimming Pool Waterproofing
A pool holds water under constant pressure, so the shell needs a specialist system — not a general coating. This is work most tricity contractors don't do well, and it's one of our strengths.
Signs you need it- Dropping water level / unexplained loss
- Damp patches around the pool structure
- New pool needing waterproofing before tiling
- Shell prep + crack and joint treatment
- Multi-coat waterproofing system for constant water load
- Curing & water-retention testing before handover
Water Tank Waterproofing
Overhead and underground tanks need coatings that are safe for stored water and tough enough to handle constant moisture and pressure.
Signs you need it- Damp or seepage on tank exterior walls
- Dropping water level / slow leaks
- New tank before commissioning
- Cleaning, crack treatment & joint sealing
- Durable, water-safe waterproof coating
- Fill & leak test before handover
Kitchen & Bathroom Leak Repair
Hidden leaks behind tiles and around fixtures damage adjacent rooms and floors below. We trace the source and seal it — with minimal breakage.
Signs you need it- Damp on the wall shared with a bathroom/kitchen
- Seepage on the ceiling below a wet area
- Loose tiles or persistent musty smell
- Leak source tracing
- Joint & fixture sealing, area waterproofing
- Reinstatement of treated area
Wall Seepage & Dampness
Internal and external wall dampness ruins paint and plaster. We identify whether it's rising damp, external seepage or a joint/crack issue, and treat accordingly.
Signs you need it- Peeling paint, blisters or salt deposits
- Persistent damp patches after rain
- Cracks letting water through external walls
- Diagnosis of the damp source
- Crack/joint treatment + waterproof coating
- Surface ready for re-plaster/paint
Pressure Grouting & Joint Sealant
For active leaks through cracks, construction joints and structural members, we inject grout under pressure to fill voids and stop water at the source, then seal the joints.
Signs you need it- Water entering through a crack or joint
- Basement or retaining-wall seepage
- Leaking expansion/construction joints
- Crack/joint mapping & port setup
- Pressure grout injection to fill voids
- Joint sealant finish
Crack Filling
Open cracks let water in and keep spreading. We rout, fill and seal cracks on roofs, terraces and walls as part of a lasting waterproofing fix.
Signs you need it- Visible cracks on slab, terrace or walls
- Hairline cracks widening over time
- Water marks tracking along a crack line
- Routing & cleaning of the crack
- Filling with appropriate sealant/compound
- Over-coating as part of waterproofing
Common questions
How much does waterproofing cost in Chandigarh?
Cost depends on the surface, its condition, the area in square feet, and the method needed (cementitious coating, liquid membrane, pressure grouting, etc.). We give a clear written quote after a free on-site inspection, with no obligation.
How long does swimming pool waterproofing take?
A typical pool shell takes a few days depending on size, surface prep and curing time before tiling and filling. We confirm a timeline during the inspection.
Do you offer a warranty on waterproofing work?
Yes — every completed job is backed by a written warranty. The exact period depends on the service and system used and is stated in your quote.
Which areas do you serve?
We're based in Mullanpur Garibdass, New Chandigarh and serve the wider tricity, including Mohali, Kharar, Zirakpur, Chandigarh and Panchkula.
Can you fix leakage during the monsoon?
We inspect any time, but most coatings and membranes need dry surfaces to cure properly. For active leaks we can apply interim measures and schedule full treatment in suitable conditions.
Not sure which method you need?
That's what the free inspection is for. We'll diagnose the problem and recommend the right fix.